Bye Bye Standby Manual Solution

Order code: BBSMS10

The Bye Bye Standby Manual Solution is a simple way to turn a number of devices off at the end of the day without scrabbling under desks to reach inconvenient power switches. The system comprises of two components, the Wall Switch Pro and the Smart Socket Pro. The Wall Switch Pro sticks onto the cubicle wall, office wall, trunking or other suitable surface near to the equipment you want to control.

The equipment you want to turn off is then plugged into a four way extension which is then, in turn, plugged into the Smart Socket Pro.

The last person out at night presses the Wall Switch and everything plugged into the Smart Socket switches off. In the morning, the first person in presses the switch again and it all springs back into life. A very simple solution, but one that saves £'s for the average office.

Plug in operation - no additional wiring to install
No software required
Signals from the Wall Switch Pro are sent by radio so there is no wire from the Wall Switch Pro to the Smart Socket Pro.
The Wall Switch is very thin and simply sticks into place using either sticky pads or velcro tape (for office cubicles, not supplied)