;
Bye Bye Standby Smart Socket Pro
Order code: BBSSSP, BBSSSP-HD
  |
- Soak tested to ensure long operational life
- Range tested to ensure optimum range in a corporate environment
- Full compatability with the Energy Manager Appliance, Wall Switch Pro and Zone Controller
- Two product variants available:
- Standard: 4 Amp switching capability suitable for 1 or 2 typical office based PC workstations
- Heavy Duty: 13 Amp switching suitable for larger loads or 3 or 4 typical office based PC workstations
- 24 month manufacture warranty
- Simple to install, simple to operate
The Bye Bye Standby Pro Smart Socket is the physical device that switches the power on and off to your office based equipment. It can receive signals from the Wall Switch Pro to form a manually operated system for simple installation and operation. Alternatively, it can also receive signals from a Zone Controller as part of an Energy Manager solution.
This product is typically fitted either under a desk or in a floor box with a 4 way extension block plugged into it with a users workstation equipment plugged into that.
The Pro Smart Socket has a maximum of 64 different operational codes allowing it to be fitted into small, medium or large offices with either one or more Pro Network Controllers controlling it.
This product has undergone extensive testing in the field and is the switching backbone of the Energy Manager Solution.
Specifications
Physical
- Weight: 100g
- Dimensions (length x width x height):
- To end of earth pin: 51.7 x 79.9 x 52.1 mm
- Protruding section when plugged in: 51.7 x 79.9 x 29.5 mm
- Energy use: 700mw (Standby and operational)
- Switching:
- Standard: 4 Amp resistive load (1,000w)
- Heavy Duty: 13A resistive load (3,250w)
- Storage: -15 degrees C to 50 degrees C
- Operation: 3 degrees C to 40 degrees C
- IP rating: None, designed of general office use
Hardware
- Frequency: 433MHz
- Protocol: Bye Bye Standby Open Protocol 1
- Battery required: None
- Indicators: Discreet LED indicates power supply to Smart Socket Pro
- Codes: Can receive up to 64 different codes
- Safety: One time thermal cut out fuse fitted (NB this is a non user servicable part - if the fuse blows the unit will need replacing)
Servicing
- None
Approvals
- Approvals: BS approved, CE approved
 |
||||||||
|
||||||||
|
||||||||
|
||||||||
|